Sony SVT-S480ES User Manual
24
Recording
5
Press SEARCH/AUDIO ON to return to the
normal display.
normal display.
6
Press REC z.
Recording begins.
Recording begins.
To return to the MAIN MENU screen from the
current menu
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until “NEXT PUSH B” flashes and
press MENU B.
press MENU B.
Series Recording
Connect another SVT-S480ES for series recording (for
details on connection, see page 11) and set each of the
units as follows.
details on connection, see page 11) and set each of the
units as follows.
Item
Unit #1
Unit #2
Unit #3 and
subsequent
unit
subsequent
unit
SERIES REC on
ON
ON
ON
ALARM SET menu
Set the COUNTER/ 0:00:00
0:00:00
0:00:00
REAL TIME switch
to COUNTER.
to COUNTER.
Cassette tape
Loaded
Loaded
Loaded
Operating status
Recording
Turned off
Turned off
Repeat recording
Deactivated Deactivated Deactivated
Security lock
Locked
Locked
Locked
Timer recording
Deactivated Deactivated Deactivated
When all of the settings are complete, set unit #1 in
recording mode and turn off the power of unit #2 and
subsequent unit.
When recording on unit #1 is complete, the power for
unit #2 turn on and recording begins.
The unit #1 rewinds its tape when the tape come to the
end and turns off.
recording mode and turn off the power of unit #2 and
subsequent unit.
When recording on unit #1 is complete, the power for
unit #2 turn on and recording begins.
The unit #1 rewinds its tape when the tape come to the
end and turns off.
Note
For series recording, set SERIES REC in the ALARM SET
menu to ON. If it is set to OFF, recording cannot be done
even if a signal is input to the SERIES IN terminal.
menu to ON. If it is set to OFF, recording cannot be done
even if a signal is input to the SERIES IN terminal.
Recording on the Same Cassette
Repeatedly — Repeat Recording
Repeatedly — Repeat Recording
You can record on the same cassette repeatedly in two
different modes: REPEAT 1 and REPEAT 2.
different modes: REPEAT 1 and REPEAT 2.
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until “4” of the MAIN
MENU flashes on the monitor screen.
MENU flashes on the monitor screen.
3
Press MENU B.
The GENERAL SET menu appears.
The GENERAL SET menu appears.
4
Press MENU V to move the flashing to the setting
of TAPE END MODE and set to REPEAT 1 or
REPEAT 2 by pressing MENU + or –.
The REPEAT indicator lights.
of TAPE END MODE and set to REPEAT 1 or
REPEAT 2 by pressing MENU + or –.
The REPEAT indicator lights.
REPEAT 1: If an alarm input is received during
repeat recording, the recording mode switches to
alarm recording. The REPEAT indicator goes
out. After the end of the tape is reached, the tape
is automatically rewound and stops at the
beginning. The OFF indicator lights in the
display window.
alarm recording. The REPEAT indicator goes
out. After the end of the tape is reached, the tape
is automatically rewound and stops at the
beginning. The OFF indicator lights in the
display window.
REPEAT 2: If an alarm input is received during
repeat recording, the recording mode switches to
alarm recording. Repeat recording will be
performed after alarm recording is finished.
alarm recording. Repeat recording will be
performed after alarm recording is finished.
REPEAT
indicator
indicator
GENERAL SET
TAPE
TAPE IN
TAPE END MODE
TAPE IN
TAPE END MODE
MODE
TAPE USED COUNT
CLOCK ADJUST
APC
THREAD CHECK
T/D SEARCH
CLOCK ADJUST
APC
THREAD CHECK
T/D SEARCH
T – 1 2 0
STOP
REPEAT 1
OFF
0 1 : 0 0
ON
OFF
CONVENTION
STOP
REPEAT 1
OFF
0 1 : 0 0
ON
OFF
CONVENTION
PB S–VHS
AUTO
1 9 2 0 0
1 9 2 0 0
SELECT :
DATA SET :
+
/
–
RETURN : MENU
<NEXT PUSH >
BAUD RATE
REC MODE
S P
1
2-4
5
6