Sony TA-E9000ES User Manual

27

1 OPTICAL

Lights up when the source signal is a digital signal
being input through the OPTICAL terminal.

2 COAXIAL

Lights up when the source signal is a digital signal
being input through the COAXIAL terminal.

3 a DIGITAL

This indicator lights when the sound field is on and
the unit is decoding signals recorded in the Dolby
Digital (AC-3) format.

4 Playback channel indicators

The letters light to indicate the channels being played
back.
L: Front Left

R: Front Right

C: Center (monaural)

LS: Left Surround

RS: Right Surround
S: Surround (monaural or the rear components
obtained by Pro Logic processing)
The boxes around the letters light to indicate the
speakers used to playback the channels.
See the next page for details regarding the playback
channel indicators.

5 L.F.E.

The letters “L.F.E.” light up when the disc being
played contains the LFE (Low Frequency Effect)
channel. When the sound of the LFE channel signal is
actually being reproduced, the bars underneath the
letters lights up to indicate the level. Since the LFE
signal is not recorded in all parts of the input signal
the bar indication will fluctuate (and may turn off)
during playback.

6 S.WOOFER

Lights when the sub woofer selection is set to “YES”
and sound is being output from the sub woofer.

7 D. RANGE

Lights when dynamic range compression is active. See
page 36 to adjust the dynamic range compression.

8 PRO LOGIC

Lights when this unit applies Pro Logic processing to
two channel signals in order to output the center and
surround channel signals.

9 DTS

Lights up when DTS signals are input.

• When playing a DTS format disc, be sure that you have

made digital connections and that DIGITAL/ANALOG is
NOT set to ANALOG (see 5 on page 13).

•You may hear some noise when starting playback from a

DTS format LD or CD. This, however, is not a malfunction.

0 MPEG

Lights when MPEG signals are input.

!¡ RF

Lights when Dolby Digital (AC-3) RF signals are input
from the LD (LD/DVD) player.

!™ AC-3

Lights when Dolby Digital (AC-3) signals are input.

a

1

2

3

4

5

6

7

8

9

0

!¡

!™