Sony TA-E9000ES User Manual

32

See “Multi-Channel Surround Setup” on page 18 for
details on the parameters available in the SP SETUP
menu.

p Front speaker size (FRONT SP)
Initial setting : LARGE

p Center speaker size (CENTER SP)
Initial setting : LARGE

p Rear speaker size (REAR SP)
Initial setting : LARGE

p Sub woofer selection (SUB WOOFER)
Initial setting : YES

p Front speaker distance (FRONT)
Initial setting : 5.0 meter

p Center speaker distance (CENTER)
Initial setting : 5.0 meter

p Rear speaker distance (REAR)
Initial setting : 3.5 meter

p Sub woofer distance (S.W)
Initial setting : 5.0 meter

p Sub woofer phase polarity (S.W PHASE)
Initial setting : NORMAL

p Rear speaker position (REAR POSI.)
Initial setting : BEHIND

p Rear speaker height (REAR HIGHT)
Initial setting : LOW

p Front speaker roll off frequency (FRONT)
Initial setting : > 120 Hz

p Center speaker roll off frequency (CENTER)
Initial setting : > 120 Hz

p Rear speaker roll off frequency (REAR)
Initial setting : > 120 Hz

p Distance unit (DIST. UNIT)
Initial setting : METER

The EQUALIZER menu lets you adjust the equalization
(low, mid, and high frequencies) of the front, center, and
rear speakers individually. The equalizer bank lets you
store up to 5 different equalizer settings.
The following menu is only available after pressing
EQUALIZER BANK and selecting one of the equalizers
(EQ PRESET 1~5).

p Front speaker bass adjustment (Level/
Frequency)

FRONT BASS +XX.XdB

FRONT BASS XXXHz

1 Turn MENU to select the level (dB) or frequency (Hz).
2 Turn +/– to adjust.
Repeat until you achieve the sound you desire.

• The level can be adjusted ±10 dB in 0.5 dB steps.
• The frequency can be adjusted from 99 Hz to 1 kHz in

21 steps.

p Front speaker midrange adjustment (Level/
Frequency)

FRONT MID +XX.XdB

FRONT MID XXXHz

Adjust as described in “Front speaker bass adjustment”.
• The level can be adjusted ±10 dB in 0.5 dB steps.
• The frequency can be adjusted from 198 Hz to 10 kHz in

37 steps.

p Front speaker midrange bandwidth

FRONT MID [WIDE]

This parameter lets you adjust the width of the midrange
band.
• “WIDE” provides a wide band centered on the selected

frequency, for general adjustments.

• “MIDDLE” provides a normal band.
• “NARROW” provides a narrow band centered on the

selected frequency, for specific adjustments.