Sony TA-F501ES User Manual
9
GB
G
e
tting Star
te
d
Preparing the remote
Pull out the insulating sheet to
allow power to flow from the
battery.
allow power to flow from the
battery.
The remote already contains a battery.
Replacing the battery in the
remote
remote
1
Slide out the battery case in the
direction of arrow 2 by pushing the
lock in the direction of arrow 1 and
then remove the battery from the
battery case.
direction of arrow 2 by pushing the
lock in the direction of arrow 1 and
then remove the battery from the
battery case.
2
Insert a new lithium battery CR2025
with the + side facing up.
with the + side facing up.
3
Slide the battery case back in.
Note
If you do not use the remote for a long period of
time, remove the battery to avoid possible damage
from battery leakage and corrosion.
time, remove the battery to avoid possible damage
from battery leakage and corrosion.
Notes on lithium battery
• Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
immediately consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Note
Do not expose the remote sensor
to direct
sunlight or lighting apparatus. Doing so may cause a
malfunction.
malfunction.
Tip
When the remote can no longer operate the system,
replace the battery with a new one.
replace the battery with a new one.
A lithium battery CR2025
WARNING
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of in fire.
Do not recharge, disassemble or dispose of in fire.