Sony SX-M100 User Manual
14
Setting Up the System
System Connection
This section explains how to connect the system.
Chairman’s unit/delegate’s unit and
interpreter’s unit
The SX-M100 Control Unit is provided with four
DELEGATE’S/CHAIRMAN’S UNIT connectors.
Up to 15 chairman’s/delegate’s units can be
connected to each of the DELEGATE’S/
CHAIRMAN’S UNIT connectors in serial
connection. The distance between the control unit
and the last chairman’s/delegate’s unit should not
exceed 60 meters (196.8 feet).
interpreter’s unit
The SX-M100 Control Unit is provided with four
DELEGATE’S/CHAIRMAN’S UNIT connectors.
Up to 15 chairman’s/delegate’s units can be
connected to each of the DELEGATE’S/
CHAIRMAN’S UNIT connectors in serial
connection. The distance between the control unit
and the last chairman’s/delegate’s unit should not
exceed 60 meters (196.8 feet).
Notes
• Be sure to turn off the power of any units before
attempting connection or disconnection.
• The desktop type SX-C100A/D100A and the
desk-mounted SX-C150/D150 are used with this
system.
It is not recommended to mix both combinations.
system.
It is not recommended to mix both combinations.
• When the SX-C100A/D100A is used, the SX-
C700A/C750/D700A/D750 Chairman’s Unit/
Delegate’s Unit, designed for the simultaneous
interpretation conference system, can be
connected to configure this conference system.
However, after the system power is turned on,
the microphone indicator and MIC ON/OFF
buttons of the chairman’s unit and delegate’s unit
continue to blink for about 3 seconds to inform
that the SX-C700A/D700A units for
simultaneous interpretation conference system
have been connected to the conference system.
Delegate’s Unit, designed for the simultaneous
interpretation conference system, can be
connected to configure this conference system.
However, after the system power is turned on,
the microphone indicator and MIC ON/OFF
buttons of the chairman’s unit and delegate’s unit
continue to blink for about 3 seconds to inform
that the SX-C700A/D700A units for
simultaneous interpretation conference system
have been connected to the conference system.
• If you turn on the system power before
connecting the chairman’s unit/delegate’s unit,
the microphone indicators and MIC ON/OFF
buttons continue to blink and these units cannot
be controlled by the control unit. In such a case,
turn the power off, then back on again.
the microphone indicators and MIC ON/OFF
buttons continue to blink and these units cannot
be controlled by the control unit. In such a case,
turn the power off, then back on again.
• When using the DELEGATE’S/CHAIRMAN’S
UNIT connectors of the SX-M100 Control Unit,
attach the dust caps removed from the 20-pin
multi-connectors on the control unit to the 20-pin
multi-connectors on the last unit connected.
If the 20-pin multi-connector has no dust cap,
keep it away from metal tools, such as
screwdrivers to prevent the connector being
inadvertently shorted.
attach the dust caps removed from the 20-pin
multi-connectors on the control unit to the 20-pin
multi-connectors on the last unit connected.
If the 20-pin multi-connector has no dust cap,
keep it away from metal tools, such as
screwdrivers to prevent the connector being
inadvertently shorted.
Precautions
Safety precautions
Power supply
• Operate the unit only with a power source as
• Operate the unit only with a power source as
specified in “Specifications” section.
• Do not drop or place heavy objects on the power
cord. If the power cord is damaged, turn off the
power immediately. It is dangerous to use the
unit with a damaged power cord.
power immediately. It is dangerous to use the
unit with a damaged power cord.
• Disconnect the power cord from the AC outlet by
grasping the plug, not by pulling the cord.
Keep foreign objects out of the cabinet
Dropping flammable or metal objects into the
cabinet, or spilling liquids onto the cabinet can
lead to accidents.
Dropping flammable or metal objects into the
cabinet, or spilling liquids onto the cabinet can
lead to accidents.
In case of malfunctions
If you notice any unusual sound, smell or smoke,
turn off the power immediately, disconnect the
power supply and contact your Sony dealer.
If you notice any unusual sound, smell or smoke,
turn off the power immediately, disconnect the
power supply and contact your Sony dealer.
Cleaning
Clean the cabinet and panels by wiping with a soft,
dry cloth. For severe stains, moisten the cloth with
a small amount of neutral solvent, and finish by
wiping with a dry cloth. Do not use alcohol,
benzine, thinner or volatile liquids, as these may
discolor or damage the cabinet surface.
dry cloth. For severe stains, moisten the cloth with
a small amount of neutral solvent, and finish by
wiping with a dry cloth. Do not use alcohol,
benzine, thinner or volatile liquids, as these may
discolor or damage the cabinet surface.