Sony TCD-D100 User Manual
Recording
28
EN
3
Press the START ID•ENTER button during
Rehearsal function. “
Rehearsal function. “
” will appear for a
moment. “
” will flash and the Start ID will
be written. During this step the sound will be
muted.
muted.
To adjust the selected point
Each time you press the = 0 or ) + button,
the selected point shifts backwards or forwards in 0.3-
second increments, up to a maximum extent of about
10 seconds in either direction.
Each time you press the = 0 or ) + button,
the selected point shifts backwards or forwards in 0.3-
second increments, up to a maximum extent of about
10 seconds in either direction.
Erasing Start IDs
You can erase the Start IDs without erasing the
contents of the existing recording.
contents of the existing recording.
Erasing the Start ID is possible only when the tape-
corder is in the stop or playback mode.
corder is in the stop or playback mode.
1
Press the ) + or = 0 button to locate the
Start ID you want to erase.
Start ID you want to erase.
2
Press the START ID•MODE button repeatedly
until “ERASE” appears in the display of the main
unit.
until “ERASE” appears in the display of the main
unit.
3
Press the START ID•ENTER button.
The tape will automatically rewind to find the
Start ID of that program (track) and then
“
Start ID of that program (track) and then
“
” will flash in the display and start to
erase the Start ID. During this step the sound will
be muted. Playback will start when this mode is
done.
be muted. Playback will start when this mode is
done.
Note
If a Start ID is erased, the
program number which is
written on the same point
will be erased also.
If a Start ID is erased, the
program number which is
written on the same point
will be erased also.
0.3
0.3
Selected point
Tape
Each time you press
the ) + button.
the ) + button.
Each time you
press the
=
press the
=
0 button.