Sony vaio pcwa-a500 User Manual

Display the Access Point setup page by entering the IP
address in the web browser.

Connect the Access Point to the AC adapter.

Hint

There is no power switch on the Access Point. Refer to the Quick Start Guide
(separate sheet) when connecting the Access Point to the AC adapter.

Start up your web browser.

Type “http://192.168.11.1/” in the URL entry field, then press
Enter.

The Access Point setup page is displayed.

Hints

• The IP address above is the factory default setting for the Access Point. If the IP

address has been changed, contact your network administrator.

• When using the NAT Router mode, the Access Point IP address is set to the

default gateway for that network.

• When using the Bridge mode, contact your network administrator for the Access

Point IP address.

About the Access Point password

You can set two types of Access Point passwords, administrator password
and guest password. Neither of these passwords is set when the Access
Point is shipped from the factory. Therefore, all users are able to configure
Access Point settings and display the status of the Access Point. If you want
to restrict the privileges of users, you can set a password as described on
the Easy Setup page or the various mode setting pages of Advanced Setup.

Passwords and restrictions on executable functions are as follows.

Password types and ability to use executable functions

Function

Administrator

Guest

Status display

Possible

Easy Setup

Possible

Not possible

Advanced Setup

Possible

Not possible

Display Indicator

Possible

Not possible

Firmware update

Possible

Not possible