Sony TMR-BT10 User Manual

Page of 24
18
Troubleshooting
If you run into any problems using this unit, use the following checklist.
Should any problem persist, consult your nearest Sony dealer.
Cannot make the
BLUETOOTH connection.
, Check that this unit is turned on.
, Check that the BLUETOOTH
connecting device is turned on and
the BLUETOOTH function is on.
, Connection with the BLUETOOTH
device may not be memorized on this
unit. Make the BLUETOOTH
connection from the BLUETOOTH
device to this unit soon after pairing
is complete.
, This unit or BLUETOOTH
connecting device is in sleep mode.
, The BLUETOOTH connection is
terminated. Make the BLUETOOTH
connection again.
Cannot operate the unit.
(Connection has hung up.)
, Press the RESET button. Pairing
information is not deleted by this
operation.
Common
The unit is not turned on.
, Charge the battery of the unit.
, The unit is not turned on while
charging. Remove the unit from the
battery charging stand and then turn
on the unit.
Sound skips or the
correspondence distance
is short.
, If a device that generates
electromagnetic radiation, such as a
wireless LAN, other BLUETOOTH
device(s), or a microwave oven is
nearby, move away from such sources.
, Remove any obstacle between this
unit and other BLUETOOTH device
or move away from the obstacle.
, Locate this unit and other
BLUETOOTH device(s) as near as
possible.
, Re-position this unit.
Pairing cannot be done.
, Bring this unit and the BLUETOOTH
device closer together.