Sony TMR-BT10 User Manual
7
1
Connect the supplied
AC power adaptor with
the battery charging
stand.
AC power adaptor with
the battery charging
stand.
2
Connect the supplied
AC power adaptor to an
AC outlet.
AC power adaptor to an
AC outlet.
Charging the unit
The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
charged before using for the first time.
Battery charging
stand (supplied)
stand (supplied)
(Rear)
AC power
adaptor
(supplied)
adaptor
(supplied)
3
Put the unit on the
battery charging stand.
battery charging stand.
Note
If the holding clip is turned, the unit
cannot be set on the battery charging
stand and charging does not start.
Turn the holding clip back to the
original position before charging.
If the holding clip is turned, the unit
cannot be set on the battery charging
stand and charging does not start.
Turn the holding clip back to the
original position before charging.
Rest the unit on the battery
charging stand so that the unit’s
contact point meets the contact
pin on the battery charging
stand, and make sure that the
indicator (red) lights up.
charging stand so that the unit’s
contact point meets the contact
pin on the battery charging
stand, and make sure that the
indicator (red) lights up.
Charging is completed in
about 3 hours* and the
indicator (red) goes off
automatically.
about 3 hours* and the
indicator (red) goes off
automatically.
* Time required for empty battery
to recharge.
Tip
When charging the battery, the unit is
turned off automatically.
turned off automatically.
Continued
To an AC
outlet
outlet
Portable Stereo
Transmitter
Transmitter
Contact pin
Battery charging
stand (supplied)
stand (supplied)