Sony UP20 User Manual

A

d

jus
tment

Adjusting the Color and Picture Quality

47

You can adjust the tone so that the details in the white or 
black part are clearly printed.

Display the PRINTER SETUP menu.

Select GAMMA, and then the desired tone.
The selected tone is spelled out.

When you print an image that is narrower or wider than 
the standard screen size, a black frame may be printed or 
the image may be partially cut. Or, a black line may 
show up on the printout even though it does not appear 
on the video monitor. Any portion for which there is no 
video signal is printed in black. This may occur when 
you make printouts after connecting a different video 
source or play back using different video software. In 
such a case, you can adjust the printout area by moving 
the screen either horizontally or vertically. 

This adjustment affects only the input signal. This 
adjustment does not affect the image captured in the 
memory.

Display the WINDOW SETUP menu from the 
LAYOUT SETUP menu.

When the WINDOW SETUP menu appears, the 
images stored in the memory will be cleared.

Perform adjustments according to the printout 
obtained by using the V START, V WIDTH, H 
START and H WIDTH items.

To eliminate a horizontal black line produced at 
the top:
Adjust the top position of the image to be printed 
using the V START item.

It is alright if a black line appears at the bottom 
while you adjusting the top. You can eliminate it 
using the V WIDTH item.

Make a printout of an image where 
there are a lot of white or light-
colored areas.

S 

t SOFT

Make a printout of a normal image.

N 

t NORMAL

Make a printout of an image where 
there are a lot of black or dark-
colored areas.

H 

t HARD

PRINTER SETUP menu

Item to be used for eliminating the horizontal line on 
the bottom

Item to be used for eliminating the vertical 
line at the right side

Item to be used for eliminating the horizontal line at 
the top

Item to be used for eliminating the vertical 
line at the left side