Sony UP-51MDU User Manual

104

Installation and Adjustment

PRN  SPEED

:  /  HIGH

MOTION  CHK

P

/ c / l / PRN / i / o /

R I N T ER S E T UP

PRINTER   SETUP

COLOR : 200

 / COL / LAY / PRN / IN / OUT / 
PRINT   QTY.

: 1   [ 1 ~ 9 ]

INTERVAL

: OFF / ON

GAMMA

: S / NORMAL / H

: OFF / ON

LOAD   USER : 1 / 2 / 3  [ EXEC ]
SYSTEM

: PRESS  [ > ]

FUNCTION

: PRESS  [ > ]

C - BALANCE : PRESS  [ > ]

Q1    A                        1                        S  

You can control the printer using either of the following remote control units
connected to the REMOTE 2 or REMOTE 3 connector on the rear panel of the
printer.
• RM-91 Remote control unit (not supplied): Connected to the REMOTE 2

connector

• FS-30 Foot switch (not supplied): Connected to the REMOTE 3 connector.

In addition, you can also remote control the printer by using a remote control unit
which sends the remote control signal to the Pin No.5 of the REMOTE 3
connector.

Using the menu, you can assign the desired functions to the remote control unit
connected to the REMOTE 2 or REMOTE 3 connector.
In addition, the printer can be remotely controlled by a pulse signal input to
REMOTE 2 or REMOTE 3. (See pages 126 and 127).

Also, you can control the printer using a personal computer.
For detailed information on controlling with the computer, contact with your Sony
dealer.

The FS-36 foot switch is connected to REMOTE 2 to control the printer. However,
the function of this foot switch cannot be assigned using the menu.

Press the MENU button, then select PRN by pressing the 

G or g button.

The PRINTER SETUP menu appears on the source image.

Switch PRN to green by
pressing the 

G

 or 

g

 button.

Display PRN in capital letters by
pressing the 

G

 or 

g

 button.