Sony UP-DR80MD User Manual
9
Location and Function of Parts and Controls
In
tro
duc
tro
duc
tion
G Indicators
The indicators are as shown below:
A
CLEANING indicator
Lights while cleaning is in progress.
Lights while cleaning is in progress.
B
RIBBON/PAPER indicator
Lights when an error involving the ink ribbon or
paper occurs.
Lights when an error involving the ink ribbon or
paper occurs.
C
ALARM indicator
Lights when an error such as a paper jam occurs.
Lights when an error such as a paper jam occurs.
D
PRINT indicator
Lights while printing is in progress.
Lights while printing is in progress.
The location and cause of an error can be determined
according to which of the indicators (PRINT,
ALARM, RIBBON/PAPAER and CLEANING) are
on or flashing. For details, refer to “Explanation of
Indicators” on page 23.
according to which of the indicators (PRINT,
ALARM, RIBBON/PAPAER and CLEANING) are
on or flashing. For details, refer to “Explanation of
Indicators” on page 23.
H STOP button (page 17)
Press this button to stop a continuous printing
operation.
When this button is pressed, the printer returns to
ready state after the current page is printed and
ejected.
operation.
When this button is pressed, the printer returns to
ready state after the current page is printed and
ejected.
Rear
A USB
connector
Connects to a computer equipped with the USB
interface (which conforms to USB 2.0), using a USB
cable (supplied).
interface (which conforms to USB 2.0), using a USB
cable (supplied).
B
Equipotential ground terminal connector
Used to connect to a ground (equipotential) plug to
bring the various parts of the system to the same
potential.
bring the various parts of the system to the same
potential.
C Vent openings
D ~AC IN connector (page 10)
Use the power cord provided.
E Security slot
Used to attach a security cable.
F USB cable stopper (page 10)
Fixes the USB cable to prevent it from being
disconnected.
disconnected.