Sony UWA-BR100 User Manual

Page of 2
USB Wireless LAN Adapter  UWA-BR100
4-170-221-15(1)
English
Operating Instructions
Before Use
Safety and Regulatory
Pursuant to FCC regulations, you are 
cautioned that any changes or modifications 
not expressly approved in this manual could 
void your authority to operate this equipment.
To prevent radio interference to the licensed 
service, this device is intended to be operated 
indoors and away from windows to provide 
maximum shielding. Equipment (or its 
transmit antenna) that is installed outdoors is 
subject to licensing.
Only use Wireless LAN indoors when using it 
with IEEE 802.11a/n (5 GHz).
High power radars are allocated as primary 
users (meaning they have priority) of 5250-
5350 MHz and 5650-5850 MHz and these 
radars could cause interference and/or damage 
to this device.
This device uses 5 GHz band for wireless LAN 
communication and the maximum gain of the 
antenna in this device is 6 dBi.
This equipment complies with FCC/IC 
radiation exposure limits set forth for an 
uncontrolled environment. This equipment 
should be installed and operated with 
minimum distance 20 cm between the radiator 
and your body (excluding extremities: hands, 
wrists and feet).
This device and its antenna(s) must not be co-
located or operating with any other antenna or 
transmitter except Grant condition.
For Your Convenience
Please contact Sony Customer Support 
directly if you:
  Have questions on the use of your USB 
Wireless LAN Adapter after reading 
your Operating Instructions Manual
  Experience difficulty operating your 
USB Wireless LAN Adapter
For United States
http://www.sony.com/tvsupport
or to speak with a support representative: 
1-800-222-SONY (7669)
For Canada
http://www.sony.ca/support
or to speak with a support representative: 
1-877-899-SONY (7669)
Sony will work to resolve your questions 
more quickly than your retailer or place of 
purchase.
Please Do Not Return  
the Product to the Store
Declaration of Conformity
Trade Name : SONY
Model : UWA-BR100
Responsible Party : Sony Electronics Inc. 
Address : 16530 Via Esprillo, San Diego, 
CA 92127 U.S.A.  
Telephone Number : 858-942-2230
This device complies with part 15 of the 
FCC rules. Operation is subject to the 
following two conditions: (1) This device 
may not cause harmful interference, and 
(2) this device must accept any interference 
received, including interference that may 
cause undesired operation. 
NOTIFICATION
This equipment has been tested and found 
to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. 
This equipment generates, uses and can 
radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference 
to radio communications. However, there is 
no guarantee that interference will not occur 
in a particular installation. If this equipment 
does cause harmful interference to radio or 
television reception, which can be determined 
by turning the equipment off and on, the user 
is encouraged to try to correct the interference 
by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the 
equipment and receiver.
 Connect the equipment into an outlet on a 
circuit different from that to which the 
receiver is connected.
 Consult the dealer or an experienced radio/
TV technician for help.
For Customers in Canada
This Class B digital apparatus complies with 
Canadian ICES-003.
Precautions for use
  Keep this product and this accessory out of 
the reach of children.
   This product is for use with the Unique 1.5 
m extension cable only.
  Do not pour water or other liquids onto 
this product. Doing so may cause damage.
  Do not place this product in a location near 
a heat source, or a place subject to direct 
sunlight. Doing so may cause a distortion 
or malfunction.
  Keep this product away from flammable 
objects or naked flame sources (such as 
lighted candles).
  Do not repair this product by yourself. 
Refer servicing to qualified personnel only.
Introduction
This product is the wireless adapter with 
a USB connector. It is for use with Sony 
products only. You can use this product by 
connecting it to the USB port of a system 
(such as a TV, Blu-ray Disc Player, Blu-ray 
Home Theatre System, etc.).
Standards Compliance
  Compatible with IEEE 802.11a/b/g and 
802.11n
Note
  Check the compatibility with the product 
that you connect to. For details, refer to the 
operating instructions of each product.
Accessories
  USB Wireless LAN Adapter (1)
  Unique 1.5 m extension cable (1)
  Operating Instructions (this manual) (1)
Using the USB Wireless LAN 
Adapter
Connect the USB Wireless LAN Adapter to the 
USB port of a system (such as a TV, Blu-ray 
Disc Player, Blu-ray Home Theatre System, 
etc.). The optional product lineup differs 
depending on the area.
Notes
  The location where the transmission is 
most effective differs depending on the 
usage environment. In this case, use the 
Unique 1.5 m extension cable. Be sure to 
connect to target devices or the supplied 
extension cable. Connecting to other 
devices or other cables may cause 
communication failure.
  Check precautions and instructions about 
the usage location of the product. For 
details, refer to the operating instructions 
of each product.
Specifications
Standards Compliance: 
IEEE 802.11a/b/g/n
Host Interface: 
USB 2.0
Security:  
64/128 bit: WEP, WPA/WPA2, WPS
Frequency and Channel*
1
2.4 GHz – 2.4835 GHz [CH1 – 11] 
5.15 GHz – 5.25 GHz [CH36 – 48] 
5.25 GHz – 5.35 GHz [CH52 – 64] 
5.47 GHz – 5.725 GHz [CH100 – 140] 
5.725 GHz – 5.85 GHz [CH149 – 165]
Data Rate*
2
802.11a/g: 54, 48, 36, 24, 18, 12, 9 and 
6 Mbps 
802.11b: 11, 5.5, 2 and 1 Mbps 
802.11n: up to 300 Mbps (40 MHz/spatial 
streams: 2)
Power consumption: 
Tx: up to 500 mA
Mass (Approx.): 
USB Wireless LAN Adapter: 27 g (1 oz)
Dimensions (Approx.) (w × h × d): 
USB Wireless LAN Adapter: 
96 mm × 14 mm × 27 mm 
(37/8 inches × 9/16 inches × 11/8 inches)
Design and specifications are subject to change 
without notice.
*
1
 The frequency and channel differ 
depending on the area.
*
2
 The transmission speed differs depending 
on the distance and number of obstructions 
between the transmission products, the 
configuration of products, the radio wave 
conditions, the line traffic, and the products 
that you use. The transmission may also 
be cut off depending on the radio wave 
conditions. The standard values of the 
transmission speed are the theoretical 
maximum values for the wireless standards. 
They are not the actual speeds of data 
transmission.
Français
Mode d’emploi
Avant utilisation
Sécurité et réglementation
Conformément aux règlements de la FCC, 
vous êtes averti que tous les changements ou 
modifications non expressément approuvés 
dans ce manuel pourraient annuler tous vos 
droits relatifs à l’utilisation de ce produit.
Pour empêcher que cet appareil cause du 
brouillage au service faisant l’objet d’une 
licence, il doit être utilisé à l’intérieur et devrait 
être placé loin des fenêtres afin de fournir 
un écran de blindage maximal. Si le matériel 
(ou son antenne d’émission) est installé à 
l’extérieur, il doit faire l’objet d’une licence.
Les radars haute puissance sont alloués comme 
utilisateurs principaux (autrement dit, comme 
utilisateurs prioritaires) des bandes des 
5250-5350 MHz et 5650-5850 MHz et peuvent 
donc provoquer des interférences et/ou 
endommager ce dispositif.
Ce dispositif utilise la bande des 5 GHz pour 
les communications réseau sans fil et le gain 
maximal de l’antenne intégrée est de 6 dBi.
Ce dispositif est conforme aux limites 
d’exposition aux rayonnements de la FCC/IC 
prescrites pour un environnement non 
contrôlé. Ce dispositif doit être installé et 
utilisé en laissant une distance minimale de 
20 cm entre le radiateur et le corps (y compris 
les extrémités : mains, poignets et pieds).
Ce dispositif et son (ses) antenne(s) ne 
peuvent pas être implantés ou utilisés avec 
d’autres antennes ou émetteurs sauf condition 
Grant.
Pour votre commodité
Veuillez communiquer directement 
avec le service à la clientèle de Sony 
si vous :
  Avez des questions sur l’utilisation de 
votre Adaptateur USB réseau local sans 
fil après avoir lu votre Mode d’emploi
  Eprouvez des difficultés à utiliser votre 
Adaptateur USB réseau local sans fil
Pour le Canada 
http://fr.sony.ca/support
ou parlez à l’un de nos représentants : 
1-877-899-SONY (7669)
Pour les États-Unis
http://www.sony.com/tvsupport
ou parlez à l’un de nos représentants : 
1-800-222-SONY (7669)
Sony visera à résoudre vos questions 
plus rapidement que votre détaillant ou 
emplacement d’achat.
Ne retournez pas le produit au magasin
Déclaration de conformité
Appellation commerciale : SONY
Modèle : UWA-BR100
Partie responsable : Sony Electronics Inc.
Adresse : 16530 Via Esprillo San Diego, CA 
92127 U.S.A.
Numéro de téléphone : 858-942-2230
Cet appareil est conforme à la section 
15 des règlements de la FCC. Le 
fonctionnement est soumis aux deux 
conditions suivantes : (1) cet appareil 
ne doit pas provoquer des interférences 
gênantes; et (2) cet appareil doit pouvoir 
accepter les interférences reçues, y compris 
les interférences risquant de déclencher des 
opérations non désirées.
AVIS
Cet appareil a été soumis à l’essai et s’est 
avéré conforme aux limites pour un appareil 
numérique de classe B, conformément à 
la section 15 du règlement de la FCC. Ces 
normes sont conçues pour assurer une 
protection raisonnable contre les interférences 
nuisibles dans un environnement résidentiel. 
Cet appareil génère, utilise et peut émettre de 
l’énergie radioélectrique et, s’il n’est pas installé 
ou utilisé selon les directives, peut causer des 
interférences nuisibles aux communications 
radio. Cependant, il n’existe aucune garantie 
que des interférences ne se produiront pas 
dans une installation particulière. Si ce 
matériel est source d’interférences nuisibles 
pour la réception radio ou télévisée, ce qui 
peut être déterminé en mettant l’appareil hors 
tension, puis sous tension, il est recommandé 
de tenter d’éliminer ces interférences en 
appliquant l’une ou plusieurs des mesures 
suivantes :
 Réorienter ou déplacer l’antenne réceptrice.
 Éloigner l’appareil du récepteur.
 Brancher l’appareil dans une prise d’un 
circuit différent de celui qui alimente le 
récepteur.
 Consulter le détaillant ou un technicien 
radio ou télévision qualifié pour obtenir de 
l’aide.
Pour les clients résidant au Canada
Cet appareil numérique de la classe B est 
conforme à la norme NMB-003 du Canada.
Précautions d’utilisation
  Tenez ce produit et cet accessoire hors de la 
portée des enfants.
  Ce produit doit être utilisé avec le cordon 
d’extension 1,5 m exclusivement.
  Ne renversez pas de l’eau ou d’autres 
liquides sur ce produit. Cela risquerait de 
l’endommager.
  N’installez pas ce produit à proximité d’une 
source de chaleur ou dans un endroit 
exposé aux rayons directs du soleil. Ceci 
pourrait entraîner sa déformation ou un 
dysfonctionnement.
  Tenez ce produit à l’écart des objets 
inflammables ou des sources de flamme 
nue (notamment des bougies allumées).
  Ne réparez pas vous-même ce produit. 
Confiez les réparations à un technicien 
qualifié uniquement.
©2009   Sony Corporation
    
 Printed in China