Sony UP-970AD User Manual

3

4. This equipment generates, uses, and can radiate radio 

frequency energy. If it is not installed and used in 
accordance with the instruction manual, it may cause 
interference to other equipment. If this unit causes 
interference (which can be determined by 
unplugging the power cord from the unit), try these 
measures: Relocate the unit with respect to the 
susceptible equipment. Plug this unit and the 
susceptible equipment into different branch circuit. 
Consult your dealer. (According to standard 
EN60601-1-2 and CISPR11, Class B, Group 1)

Caution
When you dispose of the unit or accessories, you must 
obey the law in the relative area or country and the 
regulation in the relative hospital.

Use a proper power cord for your local power supply.
1. Use the approved Power Cord (3-core mains lead) / 

Appliance Connector / Plug with earthing-contacts 
that conforms to the safety regulations of each 
country if applicable.

2. Use the Power Cord (3-core mains lead) / Appliance 

Connector /Plug conforming to the proper ratings 
(Voltage, Ampere).

If you have questions on the use of the above Power 
Cord/Appliance Connector/Plug, please consult a 
qualified service personnel.

Please use the following power supply cord.
With connectors (plug or female) and cord types other 
than those indicated in this table, use the power supply 
cord that is approved for use in your area.

*Note: Grounding reliability can only be achieved when the equipment 

is connected to an equivalent receptacle marked ‘Hospital Only’ or 
‘Hospital Grade’.

Plug Type

HOSPITAL GRADE*

HOSPITAL GRADE*

Female end

E62405, E35708

LR53182, LL022442, 
LL088408

Cord type

E159216, E35496
Min.Type SJT
Min.18 AWG

LL112007-1, LL20262, 
LL32121, LL84494
Min.Type SJT
Min.18AWG

Minimum cord set 
rating

10A/125V

10A/125V

Safety approval

UL Listed

CSA