Sony UP-970AD User Manual
Ot
he
rs
he
rs
Specifications
38
1 GND
2 PRINT SIGNAL (TTL)
2 PRINT SIGNAL (TTL)
Input of LOW pulse over 100 msec.
initiates print.
initiates print.
3 PRINT BUSY (TTL)
Goes HIGH during printing.
Addition of interface
USB (USB 2.0 compatible)
Accessories provided
Print media (1)
USB Cable 1-824-211-41 (SONY) (1)
BNC Cable 1-551-475-32 (SONY) (1)
Thermal head cleaning sheet
USB Cable 1-824-211-41 (SONY) (1)
BNC Cable 1-551-475-32 (SONY) (1)
Thermal head cleaning sheet
(1)
Media label (1)
CD-ROM (Operating Instructions,
CD-ROM (Operating Instructions,
printer driver, printer driver install
guide) (1)
guide) (1)
Software License Agreement (1)
Getting Started (1)
Getting Started (1)
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
UP-970AD
Power requirement
100 to 240 V AC, 50/60 Hz
Input current
2.4 A to 1.3 A max. at 25 °C
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20 % to 80 %
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20 % to 80 %
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions
316
× 132.5 × 305 mm (w/h/d)
(12 1/2
× 5/ 1/4 × 12 1/8 inches)
Mass
8 kg (17 lb 10 oz) (printer only)
Thermal head
Thin-film thermal head, 2,560 dots
Gradation
256-level gradation (8-bit)
Resolution
EIA: 1,280
× 508 dots
CCIR: 1,280
× 612 dots
Picture size
When “S:STD” is selected from
“SIDE”
EIA: 190
EIA: 190
× 147 mm
CCIR: 190
× 142 mm
When “S:SIDE” is selected from
“SIDE”
EIA: 253
EIA: 253
× 194 mm
CCIR: 257
× 190 mm
Printing speed
About 8 sec./image
(at standard setting)
Picture memory Analog mode:
6 frames (800 k
× 8 bits per frame)
Digital mode:
3,414
× 2,560 dots max.
Input connector VIDEO IN (BNC type)
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohms/high-impedance
(EIA/CCIR automatically
discriminated)
(EIA/CCIR automatically
discriminated)
Output connector
VIDEO OUT (BNC type)
EIA or CCIR composite video signals
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohm loop-through/EE
switchable
switchable
REMOTE connector (stereo mini jack)