Sony XAV-7W User Manual
37
MENU
V/v
B/b
Setting the high-pass filter (HPF)
This setting lets you control the frequency response to fit
the characteristics of installed speakers. By choosing the
appropriate high-pass filter cutoff frequency, you can
ensure that the speakers produce crisp mid/high-range
sound. For example, if the 78 Hz setting is selected, only
signal components above 78 Hz are sent to the speakers.
the characteristics of installed speakers. By choosing the
appropriate high-pass filter cutoff frequency, you can
ensure that the speakers produce crisp mid/high-range
sound. For example, if the 78 Hz setting is selected, only
signal components above 78 Hz are sent to the speakers.
Selecting the speaker output cutoff
frequency
frequency
Proceed the following steps with the card remote
commander while the monitor is open.
commander while the monitor is open.
1
Select the source (CD, MD, radio, etc.).
2
Press MENU.
3
Press V or v to select “HPF”.
H P F
7 8 H z
4
Press B or b to select the cutoff frequency.
Each press of the button cycles through the following
settings:
off (default setting)
settings:
off (default setting)
y 78 Hz y 125 Hz
5
Press MENU.
The regular display appears again.
Cut-off frequency
Frequency (Hz)
Level
off