Sony VPL-PX11 User Manual

12

 (GB)

Location and Function of Controls

ON/STANDBY: Lights up or flashes under the

following conditions:
• Lights up in red when the AC power cord is

plugged into the wall outlet. Once in the
standby mode, you can turn on the projector
with the 

I / 

1 key.

The built-in circuits provided for carrying out
the Off & Go function (page 8 (GB)) may keep
the cooling fan running for a while after the
ON/STANDBY indicator turns from green to
red just after you turn off the projector by
pressing the 

I / 

1 key.

• Lights up in green when the power is turned on.
• Flashes in green while the cooling fan runs after

the power is turned off with the 

I / 

1 key. The

fan runs for about 90 seconds after turning off
the power.
The ON/STANDBY indicator flashes quickly
for the first 60 seconds of that time.
During this first 60 seconds, you cannot turn the
power back on with the 

I / 

1 key.

Left side

OUTPUT

REMOTE

VIDEO IN

INPUT B

INPUT A

~

AC IN

PUSH

5

6

4

3

2

1

1

Connects the supplied AC power cord.

2

Connect to external equipment such as a computer.

Connects to the monitor output on a computer
using the supplied cable.
When inputting a component or 15k RGB signal,
use the appropriate cable.

AUDIO jack (stereo minijack): Connects to the

audio output of the computer.

Connects to a computer. When you connect the
projector to the computer via this connector, the
projector recognizes that a USB mouse is
connected and you can control the mouse
function of the computer connected to the INPUT
A connector using the supplied Remote
Commander. The supplied application software
can be used on the computer connected to this
connector.