Sony vgc-la3 User Manual

Page of 152
109
Precautions
On Using the Built-in MOTION EYE Camera
Do not touch the front mirror plate over the lens of the built-in MOTION EYE camera, as it may make scratches on the 
plate and such scratches will appear on the captured images.
Do not let the direct sunlight get into the scope of the built-in MOTION EYE camera regardless of your computer's power 
state, as it may cause a malfunction of the camera.
The built-in MOTION EYE camera is disabled while videos or still images are imported from an i.LINK-compatible device 
connected to the i.LINK port.
Clean the front mirror plate over the lens of the built-in MOTION EYE camera with a blower brush or a soft brush. If the 
lens is extremely dirty, wipe it off with a soft dry cloth. Do not rub the plate, as it is force-sensitive.
 
On Handling Floppy Disks
Do not open the shutter manually or touch the surface of the floppy disk.
Keep floppy disks away from magnets.
Keep floppy disks away from direct sunlight and other sources of heat.
Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove 
it from the floppy disk drive and use a storage case.
If the floppy disk comes with an adhesive label, make sure that the label is properly affixed. If the edge of the label is 
curled up, the label may stick to the inside of the floppy disk drive and cause a malfunction or damage your floppy disk.