Sony VGF-AP1L User Manual

34

G-sense pad does not
function properly.

Also refer to the “SonicStage” online help.

Cannot transfer music.

An error message is shown.

Tracks recorded from an audio
CD have noise on them.

The remaining transfer count of
a track is not the same as the
actual count.

c Change the area and sensitivity setting of the G-sense pad. For

details, see page 25.

c Press the reset button (page 6).

After a reset, the G-sense pad sensitivity must be set again (page 25).

c If there is moisture on the G-sense pad, it will not operate normally.

Wipe it with a dry cloth.

c Confirm that the player is correctly set in the cradle.

c Confirm that the cradle is correctly connected to the computer.

c If there is not enough free space on the internal hard disk of the

player, transfer cannot be carried out. Connect the player to the
computer and use the “SonicStage” software to delete unnecessary
files.

c The number of transfers that are permissible for a single song may

be limited. For details, refer to the “SonicStage” online help.

c Never disconnect the USB cable during a transfer. Otherwise an

error message will be shown and transfer is not possible.

c Using another program while the “SonicStage” software is recording

can add noise to the recorded track. Do not operate other programs
while the “SonicStage” software is recording.

c The CD drive needs to be checked. Click “Options” on the “Tool”

menu to display the “Options" dialog box, and click “CD drive
settings” on the left. Click “Test CD drive” on the right to test the
drive.

c If a track is deleted from a device/media, the remaining transfer

count of the track in My Library may not be restored (only applies to
restricted content). To restore the track's transfer count, connect the
device/media to your computer, and click on the “Controls” menu,
point to “Device/Media”, and then click “Recover Rights”.

c If the player was disconnected from the computer during the transfer

of a song, the permission count may be incremented and it may not
be possible to reset it.