Sony VPL-PS10 User Manual

32

 (GB)

The INSTALL SETTING menu is used for changing
the install settings of the projector.

INPUT-B FUNC. is displayed only for the VPL-
PX15.

Use the 

M or m key to select the item, then press the

, or ENTER key.

• When changing the adjustment level:

To increase the value, press the 

M or , key.

To decrease the value, press the 

m or < key.

Press the ENTER key to restore the original screen.

• When changing the setting:

Press the 

M or m key to change the setting.

Press the ENTER or 

< key to restore the original

screen.

INSTALL SETTING

KEYSTONE MEM: ON

DIGIT KEYSTONE: 0

INSTALLATION:

CEILING-FRONT

MENU POSITION: CENTER

MENU COLOR:

STANDARD

MENU BACKGRND:

STANDARD

INPUT-B FUNC.:

ON

LAMP TIMER: 234H

INPUT-A

Sets up the on-screen display.

ON: Shows all of the on-screen display.
OFF: Turns off the on-screen display except for the

menus, a message when turning off the power,
and warning messages.

Selects the computer, component or video GBR (15k
RGB) signal input from the INPUT A connector.

If the setting is not correct, “Please check INPUT-A
setting.” appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.

When set to ON, the projector detects input signals in
the following order: INPUT-A/INPUT-B (VPL-PX15
only)/VIDEO/S-VIDEO. It indicates the input channel
when the power is turned on or the INPUT key is
pressed.

Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese, Chinese, Portuguese and
Korean.

When set to ON, the projector goes into the power
saving mode if no signal is input for 10 minutes.

Selects the remote control detectors on the front and
rear of the projector.

FRONT & REAR: Activates both the front and rear

detectors.

FRONT: Activates the front detector only.
REAR: Activates the rear detector only.

The SET SETTING Menu / The INSTALL SETTING Menu