Sony VPL-CX86 User Manual
14
Connecting the Projector
Connecting the
Projector
Projector
When you connect the projector,
make sure to:
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out by the plug, not the cable itself
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out by the plug, not the cable itself
When connecting to a wireless LAN using
the Air Shot, see “Operating Instructions for
Air Shot” stored on the CD-ROM (VPL-
CX86 only).
the Air Shot, see “Operating Instructions for
Air Shot” stored on the CD-ROM (VPL-
CX86 only).
This section describes how to connect the
projector to a computer.
For more information, refer to the
computer’s instruction manual.
projector to a computer.
For more information, refer to the
computer’s instruction manual.
To connect a computer
A Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
B USB cable (supplied)(Connect the USB
cable to use a wireless mouse.)
C HD D-sub 15-pin cable (supplied)
• The projector accepts VGA, SVGA, XGA,
SXGA, and SXGA+ signals. However, we
recommend that you set the output mode of
your computer to XGA mode for the external
monitor.
recommend that you set the output mode of
your computer to XGA mode for the external
monitor.
• If you set your computer, such as a notebook
computer, to output the signal to both your
computer’s display and the external monitor,
the picture of the external monitor may not
computer’s display and the external monitor,
the picture of the external monitor may not
Connecting a Computer
Notes
to USB connector
Right side
to monitor output
Computer
to audio output