Sony VPL-CS2 User Manual

GB 

30

The SET SETTING Menu

VPL-CS2/CX1

4-079-834-11 (1)

D:\Data\Oka\407983411VPLCS2CX1WW\02GB-
VPLCS2,CX1WW\05AJT.fm

The SET SETTING menu is used for 
changing the settings of the projector.

Sets up the on-screen display.

ON: Shows all of the on-screen displays.

OFF: Turns off the on-screen displays 

except for the menus, a message when 
turning off the power, and warning 
messages.

Selects the RGB or component signal input 
from the INPUT A connector.

If the setting is not correct, “Please check 
INPUT-A setting.” appears on the screen and 
the color of the picture becomes strange or the 
picture is not displayed.

Memorizes the data adjusted with DIGITAL 
KEYSTONE.

Adjusts trapezoidal distortion of the picture 
that may occur depending on the projection 
angle.

 : Sets to a plus 

value.

Selects the language used in the menu and 
on-screen displays. Available languages are: 
English, French, German, Italian, Spanish, 
Japanese and Chinese.

When set to ON, the projector goes into 
power saving mode if no signal is input for 
10 minutes.

Selects the remote control detectors (SIRCS 
receiver) on the front and rear of the 
projector.

FRONT & REAR: Activates both the front 

and rear detectors. 

FRONT: Activates the front detector only.

REAR: Activates the rear detector only.

Indicates the total number of hours for which 
the lamp currently used has been operated.

SET SETTING

STATUS:

ON

INPUT-A:

RGB

KEYSTONE MEMORY: OFF

DIGITAL KEYSTONE:

OFF

LANGUAGE:

ENGLISH

POWER SAVING:

OFF

SIRCS RECEIVER:

FRONT&REAR

LAMP TIMER:

00010h

INPUT-A