Sony VPL-PX15 User Manual
5
VPL-PX15
PJ Talk
1 2 3 4 5 6
7 8 9 101112
A
B
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
E
ther
n
e
t
A
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
C
HUB
LAN
Control
Application
3.
PJ Talk
The PJ Talk that is the network service of projector, is the application program that enables communica-
tion control of the projector from the network (LAN) that has been provided by RS-232C/485. Vendor
tion control of the projector from the network (LAN) that has been provided by RS-232C/485. Vendor
can create the control application easily in a short time by using the PJCP protocol (projector Control
Protocol) that is compatible with the existing RS-232C/485.
Protocol) that is compatible with the existing RS-232C/485.
Fig. 5 Relationship with the control software
3-1. Features
This section describes the main features of the PJ Talk.
Remote control
The controls such as turning on/off the power and selecting inputs can be performed from a personal
computer or the control device at the remote location on the same LAN network.
computer or the control device at the remote location on the same LAN network.
PJCP
The PJCP uses the same format and command systems as those of the serial protocol of the VPL-FX50.
Port number
The desired port number can be used. Therefore, the port numbers that are unique to the SI vendor can be
supported.. Default is 53484.