Sony VPL-PS10 User Manual

11

 (GB)

Adjust the height of the projector as follows:

Lift the projector and press the adjuster buttons.
The adjusters will extend from the projector.

While pressing the buttons, adjust the height.
Then, release the buttons.
The adjusters will lock, then the height of the
projector will be fixed. For fine adjustment, turn
the adjusters to the right or left.

If the adjusters have been extended to the limit
and you keep turning the adjusters
counterclockwise, the adjusters will stop turning
and the adjuster buttons cannot be pressed. In this
case, turn the adjusters clockwise, and then press
the adjuster buttons again.

If necessary, turn the rear adjusters to the right or
left to adjust the height of the projector.

• Be careful not to let the projector down on your

fingers.

• Do not push hard on the top of the projector with the

adjusters out.

Adjuster buttons

1

If you need help information during an operation,
press this key to display help messages. The Help
menu lists error recovery techniques depending on
problem type.

2

Adjust the volume of the built-in speakers.

+ : Increases the volume.
– : Decreases the volume.

3

Adjusts the picture to be projected automatically to
give the clearest picture possible while a signal from
the computer is input. Adjusts the shift (up/down and
left/right) at the same time automatically.

Press the APA key when the full image is displayed
on the screen. If there are black edges around the
image, the APA function will not function properly
and the image may extend beyond the screen.

4

Resets the value of an item to its factory preset value.
This key functions when the menu or a setting item is
displayed on the screen.

5

M/m/</,) keys

Used to select a menu or to make various adjustments.

6

Enters the settings of items in the menu system.

HELP

LAMP/

COVER

TEMP/

FAN

POWER

SAVING

ON/

STANDBY

RESET

APA

VOLUME

ENTER

INPUT

MENU

1

2

3 4 5 6 7 8

q;

9

Location and Function of Controls