Sony VPL-PS10 User Manual

33

 (GB)

ON: The DIGIT KEYSTONE setting is stored.

The data is retrieved when the projector power is
turned on. The setting will remain the same every
time.

OFF: The DIGIT KEYSTONE is reset to 0 when the

power is turned on next time.

Corrects the trapezoidal distortion caused by the
projection angle.
If the base edge of the image is longer, set a negative
value; if the upper edge is longer, set a positive value
to display the image as a rectangle.

Set this item to reverse the picture horizontally or
vertically.

FLOOR-FRONT: The picture is not reversed.
CEILING-FRONT: The picture is reversed

horizontally and vertically.

FLOOR-REAR: The picture is reversed

horizontally.

CEILING-REAR: The picture is reversed

vertically.

When using a mirror, be careful of how the
installation is carried out since the picture may be
reversed.

Selects the display position of the menu from TOP
LEFT, BOTTOM LEFT, CENTER, TOP RIGHT and
BOTTOM RIGHT.

Selects the tone of the menu display from
STANDARD, WARM, COOL, GREEN or GRAY.

Selects the intensity of the background picture of the
menu display from DARK, STANDARD or LIGHT.

Set to ON when using the Windows CE function.

Be sure to exit every application that is open before
you switch the setting from ON to OFF. Otherwise,
the system may crash and you may not be able to
restart the projector.

Indicates how long the lamp has been turned on.

This only displays the time. You cannot alter the
display.

The INSTALL SETTING Menu