Sony 4-125-572-12 (1) User Manual

17

Making a Wireless Connection with a Computer

P

re

par

a

tio

n

Configure the settings on the 
connected computer.

Open the [Wireless Network 
Connection] menu on the computer to 
select the same network as that 
displayed under “Network Name 
(SSID)” in the menu in step 5.

The connection between the projector 
and the computer has been made and the 
IP Address of the projector is displayed 
under “Network Address.”

It may take about one minute to obtain an 
IP Address.

SSID, Encryption Key, etc. is required to be 
entered according to your wired Lan 
environment. Consult your network 
administrator.

Some security systems such as 802.1x 
Authentication cannot be set with Simple 
Setting. Use the menus of the projector to set 
such security systems.

Press the NETWORK key on the 
remote commander.

The following menu appears:

Press the v or V key to select “Simple 
Setting” then press the ENTER key.

The message “Simple Setting started.” 
appears on the screen.

Press the B key.

The following menu appears:

Press the v or V key to select 
“Wireless Access Point” then press the 
B key.

The access point select menu appears.

It may take some time to detect an access 
point.

SonyProj2EA509
SonyProj99808B8
169.254.163.130

Select: 

Set: 

Switch

Detail Information

Windows Vista

®

 Network Projector

address" and "Projector password" at
"Connect to a Network Projector" of
Windows Vista

®

.

Search for a projector or enter the "Network

Network Name (SSID):
Projector Name:
Network Address:
Projector Password:

Windows Vista

®

 Network Projector

Select: 

Projector not connected to network.

Set the Network setting 
with Simple Setting or the Menu.

Set: 

Switch

Detail Information

Simple Setting

Simple Setting

Select: 

Next: 

Use Wireless network.

Select the Network Mode.

Prev.: 

Exit: 

Ad-hoc

Access Point

SSID 02

SSID 01

SSID 03

Simple Setting

Select access point.

Next: Select: 

Prev.: 

Exit: