Sony 4-125-572-12 (1) User Manual

Page of 47
44
Glossary
802.11g
A part of the IEEE802.11 standards for 
wireless network communication using the 
2.4 GHz frequency band
The maximum communication bit rate is 54 
Mbps.
802.11a
A part of the IEEE802.11 standards for 
wireless network communication using the 5 
GHz frequency band. The maximum 
communication bit rate is 54 Mbps.
Advertisement
Protocol for identifying one’s own interface 
on a network
DHCP (Dynamic Host Configuration 
Protocol)
The feature to assign an IP Address 
automatically to a device connected to a 
network. The DHCP server does not assign a 
fixed IP Address but assigns the IP Address 
to each device according to the situation.
Primary DNS (Domain Name System) 
Server
A server to identify the IP Address with the 
host name (computer name). Normally, a 
DNS server specified as Primary is used.
Secondary DNS Server
A substitute DNS Server enabled when a 
Primary DNS Server cannot be used
EAP (Extensive Authentication 
Protocol)
A protocol adopted as the IEEE802.1x 
authentication protocol
IP Address
An address to identify each device on the 
TCP/IP network
LAN (Local Area Network)
A network to be used in a limited area, such 
as an office or home
MAC address
An individual address to be assigned to an 
individual network interface when it is 
manufactured. Every interface has a 
different MAC address, and you cannot 
change the address.
NTP Server
A server to synchronize the clocks of the 
devices connected to a network using NTP 
(Network Time Protocol)
PEAP (MS-CHAP v2)
This protocol provides authentication based 
on qualification information.
PJ Link
A standard to operate and manage the Data 
Projectors
POP Server
A protocol used when e-mail is transmitted 
on the Internet.
SMTP (Simple Mail Transfer Protocol) 
Server 
A protocol used when e-mail is received 
from an e-mail server on the Internet.
SNMP (Simple Network Management 
Protocol)
A protocol used to monitor and control 
devices connected over a network
SSID (Service Set Identifier)
Identification data for a wireless LAN that 
enables connection with other wireless 
devices on the LAN. All wireless LAN 
devices employing the same SSID can 
communicate with one another.
TKIP (Temporal Key Integrity 
Protocol)
An encryption protocol that is the successor 
of WEP. TKIP is designed to create a new 
encryption key with every certain amount of 
data and time then encrypt the data. It 
provides stronger security for the data, since 
such dynamic change of the encryption keys 
renders any encryption of the key absolute.
WEP (Wired Equivalent Privacy)
A security standard that is designed to 
encrypt data for communication between 
connected devices. Registering the same key 
with the projector as that registered with the