Sony wega klv-15sr3u User Manual
28
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/– to
select the programme number with the channel. You cannot select a programme number that
is set to skip (page 29).
select the programme number with the channel. You cannot select a programme number that
is set to skip (page 29).
1
Press OK to select “Manual Programme Preset”.
2
Press
M/m to select one of the following options, then press OK.
Sound Offset
Changes the input sound level of the equipment connected to the
TV.
TV.
Press
M/m to adjust the input sound level between –9 and
+9, then press OK.
Manual Programme Preset
Option
Description
Programme
Presets programme channels manually.
1
Press
M/m to select “Programme”, then press OK.
2
Press
M/m to select the programme number you want
to manually tune (if tuning a VCR, select channel 0),
then press
then press
<.
3
Press
M/m to select “System”, then press OK.
Note
Depending on the country/region selected for “Country”
(page 26), this option may not be available.
Depending on the country/region selected for “Country”
(page 26), this option may not be available.
4
Press
M/m to select one of the following TV broadcast
systems, then press
<.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
5
Press
M/m to select “Channel”, then press OK.
6
Press
M/m to select “S” (for cable channels) or “C” (for
terrestrial channels), then press
,.
7
Tune the channels as follows:
If you do not know the channel number (frequency)
Press
Press
M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press
searching, press
M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
8
Press OK twice to store.
Repeat the procedure above to preset other channels manually.
System
Channel
Label
Assigns a name of your choice, up to five letters or numbers, to the
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
1
Follow steps 3 to 5 of “Programme Labels” (page 27).
2
Press OK.
Option
Description