Sony walkman wm-fx495 User Manual

 

 

 

 

D

You can preset up to 40 stations (7 for TV, 4 for WB,
24 for FM and 5 for AM ).

1 Press FM/AM or TV/WB repeatedly to

select the desired band.

2 Press and hold ENTER for more than 3

seconds.
Preset number 1 will flash in the display
and the Walkman starts scanning the
stations from the lower frequencies and
stops for about 5 seconds when a station is
received.

3 If you wish to preset the currently received

station, press ENTER while the preset
number is flashing.
The received station is preset on preset
number 1 and the unit starts scanning for
the next receivable station.

4 Repeat step 3 until all receivable stations

are preset.

To stop scanning
Press x•RADIO OFF. The radio is turned off at the
same time.

Notes
• If stations are already stored, the newly preset stations

replace the old ones when the above procedure is
completed.

• If stations cannot be preset automatically, preset them

manually.

1 Press FM/AM or TV/WB repeatedly to

select the desired band.

2 Press ENTER.

The frequency digits will flash in the
display.

3 While the frequency digits are flashing,

tune in to a station you wish to store using
PRESET/TUNING + or – and press
ENTER.
The preset number will flash in the display.

4 While the preset number is flashing, select

the preset number you want using
PRESET/TUNING + or – and press
ENTER.

Notes
• If you cannot complete step 3 or 4 while the indicators

are flashing, repeat from step 2.

• If a station is already stored, the new station replaces

the old one.

1 Press FM/AM or TV/WB repeatedly to

select the desired band.

2 Press MENU repeatedly to set the cursor in

the display to TUNE MODE. Then press
SET to display “PRESET”.

3 Press PRESET/TUNING + or –.

To cancel a stored station
1 Follow the procedure above and in step 3, select

the preset number you want to cancel and then
press ENTER. The frequency digits will flash in the
display.

2 Press and hold PRESET/TUNING + or –. The

frequency digit starts running up or down. Keep
holding down the button until “- - - -” is displayed.

3 Press ENTER while “- - - -” is flashing. A preset

number will flash in the display.

4 Press ENTER to cancel the stored station.

1 Press FM/AM or TV/WB repeatedly to

select the desired band.

2 Press and hold FM/AM or TV/WB pressed

in step 1 for 2 seconds or more.
The preset stations of the selected band will
be played for about 5 seconds each. (During
DAPS the indicators in the display flash.)

3 Press FM/AM or TV/WB again to select

the station while the desired preset station
is being played.

Notes
• If there are no stations stored, the DAPS function does

not work.

• Until a station is selected in step 3, the DAPS function

turned on in step 2 will continue.

• In step 2 or 3, if you select a band which you did not

select in step 1 by pressing TV/WB or FM/AM, the
newly selected band will be played normally.

D

You can preset up to 5 of your favorite stations on
the Direct Station Buttons (1 - 5) and play a station
of your choice just by pressing the corresponding
button.

1 Press FM/AM or TV/WB repeatedly to

select the desired band.

2 Tune in to the desired station.
3 Hold down one of the Direct Station

Buttons (1 - 5) to which you want to assign
the station for 2 seconds.
When the station has been preset
successfully, the beep sounds and the
indication “F1”, “F2”, “F3”, “F4” or “F5”
appears in the display.

To play a preset radio station (DSB)
You can listen to the station you want by pressing
the buttons (1 - 5) without selecting the band.
Make sure that the tape has stopped completely.

Note
If 5 stations are already stored on the Direct Station
Buttons, the newly preset station replaces the old one
when the above procedure is completed.

To operate the radio with the remote
control
To turn on the radio, press RADIO ON/
BAND•OFF for more than one second (only while
the tape is in stop mode).
To select a band, press RADIO ON/BAND•OFF for
more than one second while the radio is on.
To tune in to or recall a preset station, press PRESET
+ or –.
To turn off the radio, press RADIO ON/
BAND•OFF.

• Do not carry dry batteries with coins or other metallic objects.

It can generate heat if the positive and negative terminals of
the batteries are accidentally contacted by a metallic object.

• When you are not going to use your Walkman for a long time,

remove the battery to prevent damage from battery leakage
and corrosion.

• Do not leave the unit in a location near heat sources, or in a

place subject to direct sunlight, excessive dust or sand,
moisture, rain, mechanical shock, or in a car with its windows
closed.

• We do not recommend the use of tape longer than 90 minutes.

They are very thin and tend to be stretched easily. This may
cause malfunction of the unit or sound deterioration.

• The LCD display may become hard to see or slow down when

using the unit at high temperatures (above 40°C/104°F) or at
low temperatures (below 0°C/32°F). At room temperature, the
display will return to its normal operating condition.

• If the unit has not been used for a long time, set it in the

playback mode to warm it up for a few minutes before
inserting a cassette.

Use the supplied remote control only with this unit.

Do not use headphones/earphones while driving, cycling, or
operating any motorized vehicle. It may create a traffic hazard
and is illegal in some areas. It can also be potentially dangerous
to play your headphones/earphones at high volume while
walking, especially at pedestrian crossings.
You should exercise extreme caution or discontinue use in
potentially hazardous situations.

Do not use headphones/earphones at high volume. Hearing
experts advise against continuous, loud and extended play. If
you experience a ringing in your ears, reduce volume or
discontinue use.

Keep the volume at a moderate level. This will allow you to hear
outside sounds and to be considerate to the people around you.

• Clean the tape head and tape path using a cotton swab and

commercially available cleaning solvent after every 10 hours
of use.

•To clean the exterior, use a soft cloth slightly moistened in

water. Do not use alcohol, benzine or thinner.

•Clean the headphones/earphones and remote control plugs

periodically.

• The battery is weak. Replace the battery with new one.

• Remove the power sources for 15 seconds or more, and then

set them again.

Y

•x (RADIO

i

x