Sony XAV-A1 User Manual

♦

You can set the function of the AUX3 jack.
When you connect the back camera to AUX3
jack, set to “Back Camera”. To adjust the
position of the back camera while viewing
the image of the camera, set to “Normal”.

• Select this when you connect the

other components other than back
camera to AUX3 jack.

• Select this to test view while

connecting the back camera.
You can adjust the position of the
back camera while viewing the
image of the camera without setting
the shift lever to the “R(reverse)”
position. However, note that the
image of the camera will be
displayed only when the parking
brake is set.

Select this when you connect the back
camera to AUX3 jack.

♦

You can switch the NTSC/PAL system of the
back camera in the AUX 3 mode.
Press and hold SEEK + of the main unit for 3
seconds while in AUX3 mode. The short beep
sounds and NTSC/PAL system is now
switched.

Switches the back camera to NTSC
system.

Switches the back camera to PAL
system.

This setting is available also when AUX 3 is set to
“Normal”.

♦

Switching on and off the PBC function of
VCDs. Available only when VCD is stopped.

Turns on the PBC function.

Turns off the PBC function.

♦

Switching on and off the Demo mode. The
Demo screen is displayed only when the
power is off.

Turns on the Demo mode.

Turns off the Demo mode.

The default settings are underlined.

♦

If the touching position does not correspond
with the proper item, you will need to adjust
the touch panel position.
Touch 1, 2 and 3 of the touch panel in order.

2

1

3