Sony XAV-7W

Before operating the unit for the first time, or after
replacing the car battery or changing the connections, you
must reset the unit.
Use a pointed object such as a ball point pen to push the
Reset button. To avoid the possibility of damage, you
should not use a needle or push the button too strongly.

Reset button

DISC

SEEK

SOURCE

MODE

TA

OFF

OPEN/
CLOSE

.

>

VOL

OPEN/CLOSE 

The monitor slides out of the main unit, and the picture
comes on.

•  When the Reset button is pushed, the

time and all stored settings are lost and
will have to be reprogrammed.

•  The reset procedure takes about 10

seconds after the Reset button is
pushed.

•  When the reset procedure is

completed, press OPEN/CLOSE and
verify that the monitor opens up
properly.

• The card remote commander cannot be

used for opening up or closing the
monitor.

• If movement of the monitor during

opening or closing has been impeded
by the gear shift lever or another
obstacle, see “If movement of the
monitor has been impeded during the
monitor setting” (page 47).