Sony XBR-65HX929 User Manual

D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm

KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929

4-270-401-13(1)

Sony strongly recommends 
taking measures to prevent 
the TV from toppling over.
Unsecured TVs may topple 
and result in property 
damage, serious bodily 
injury or even death.

•

Secure the TV to a wall and/or stand.

•

Do not allow children to play or climb on 
furniture and TV sets.

•

Avoid placing or hanging items on the 
TV.

•

Never install the TV on:
– slippery, unstable and/or uneven 

surfaces.

– furniture that can easily be used as 

steps, such as a chest of drawers.

•

Install the TV where it cannot be pulled, 
pushed, or knocked over.

•

Route all AC power cords and 
connecting cables so that they are not 
accessible to curious children.

Consider the following measures when 
securing your TV to a Stand (not supplied).

Secure the Stand for the TV.

Make sure the Stand can adequately support 
the weight of the TV. Use two angle braces 
(not supplied) to secure the stand. For each 
angle brace use the appropriate hardware to:
•

Attach one side of the angle brace to the 
wall stud.

•

Attach the other side to the Stand.

Secure the TV to the Stand.

Use the optional hardware listed as follows 
(not supplied):
•

A machine screw (screwed into the TV’s 
Table-Top Stand)
For XBR-65HX929
Use M6 screw
For KDL-60/55/46NX720, 
XBR-55/46HX929 and 
KDL-55/46HX820
Use M4 screw

•

A screw or similar (attach it to the Stand)

•

Rope or chain (strong enough to support 
the weight of the TV). Make sure that 
there is no excess slack in the rope or 
chain.

Stand

Angle brace 
(not supplied)