Sony XR-4900 User Manual

The rotary commander works by pressing
buttons and/or rotating controls.

Each time you press (SOURCE), the
source changes as follows:

TUNER n CD* n MD* n TAPE

Pressing (MODE) changes the operation
in the following ways;

FM1 n FM2 n FM3 n MW n

SW1 n SW2

• CD unit* : CD1 n CD2 n …

• MD unit* : MD1 n MD2 n …
* If the corresponding optional equipment is

Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.

Rotate the control and release it to:
•Locate the beginnings of tracks on the

tape. Rotate and hold the control
momentarily, then release it to fast-wind
the tape. To start playback while fast-
winding the tape, press (MODE).

•Locate a specific track on a disc. Rotate

and hold the control until you locate the
specific point in a track, then release it to
start playback (XR-C5200 only).

•Tune in stations automatically. Rotate and

hold the control to find a specific station.

Push in and rotate the control to:
•Receive the stations memorized on the

number buttons.

•Change the disc (XR-C5200 only).

Press (ATT) to
attenuate the
sound.

Press (OFF) to turn
off the unit.

OFF

(SOURCE)

(MODE)