Sony xes-z50 User Manual

50

Digital

Set to “on” when a Sony product that dose not
support the audio bus connection or a non-
Sony component (e.g., a CD or MD player) is
connected to the digital input connector of the
system.  When set to “on,” the “AUX Digital
Audio” indication appears when you press
the SOURCE button on the rotary remote or
the wireless remote.

Analog

Set to “on” when a Sony product that does not
support the audio bus connection or a non-
Sony component (e.g., a CD or MD player) is
connected to the analog input connectors of
the system.  When set to “on,” the “AUX
Analog Audio” indication appears when you
press the SOURCE button on the rotary
remote or the wireless remote.

GND floating

Selects the ground setting when “Analog” is
set to “on.”  When set to “off,” the control
panel and the CD changer/pre-amplifier
share a common ground; when set to “on,”
they are grounded separately.

Remote in

When the AMP REM connector of an external
component is connected to the REM IN (AUX)
connector of the system, the program source
automatically switches to AUX when the
connected component is turned on.  When
both the “Digital” and “Analog” parameters
are set to “on,” set this item to “digital” or
“analog” to specify the source signal input
connector (external component) when a
control signal is detected at the REM IN
(AUX) connector.
To switch to the other program source, press
the SOURCE button on the rotary remote or
the wireless remote.