Sony xes-z50 User Manual
56
Appendix
Appendix
Troubleshooting Guide
The following checklist will help you remedy most problems you may encounter with
your system. Before going through the checklist, check the connections and the
operating procedures. Should a problem persist even after trying the remedy, consult
your Sony dealer.
your system. Before going through the checklist, check the connections and the
operating procedures. Should a problem persist even after trying the remedy, consult
your Sony dealer.
General
Problem
Cause/Remedy
No sound.
• Check the connection.
• Turn up the volume.
• Turn up the volume.
The clock does not appear when the
power is turned off.
power is turned off.
The system is installed in a car with an accessory power
supply, and “ACC Position” in the initial settings is set
to “no.” n If your car has an accessory power supply,
set “ACC Position” to “yes.”
supply, and “ACC Position” in the initial settings is set
to “no.” n If your car has an accessory power supply,
set “ACC Position” to “yes.”
The beep does not sound when you
press an operation button on the
wireless remote.
press an operation button on the
wireless remote.
“Beep” in the set up menu is set to “off.” n Set “Beep”
to “on.”
to “on.”
CD/MD
Problem
Cause/remedy
The sound skips, drops, or breaks.
• The disc is dirty. n Clean the disc.
• The disc is damaged.
• The disc is damaged.
The sound skips.
The CD or MD changer is not installed at a stable
location.
location.
Radio
The system cannot tune in a radio
broadcast; only noise is heard.
broadcast; only noise is heard.
• Check the connection of the car antenna.
• Power is not being supplied to the power antenna. n
• Power is not being supplied to the power antenna. n
Connect the power antenna control lead to the REM
ANT wire (blue) of the system.
ANT wire (blue) of the system.
• Make sure the frequency is the one you want.
The Automatic Tuning function
frequently stops.
frequently stops.
Set “Local” in the P.mode menu to “on.”
The Automatic Tuning function does not
stop at the station you want.
stop at the station you want.
• Only the strongest signals are received when “Local”
in the P.mode menu is set to “on.” n Set “Local” in
the P.mode menu to “off.”
the P.mode menu to “off.”
• Keep rotating the AMS/SEEK control until you find
the station.