Sony XR-4200R User Manual
10
Cassette Player
Listening to a tape
1
Press (OPEN) and insert a cassette.
Playback starts automatically.
Playback starts automatically.
2
Close the front panel.
If a cassette is already inserted, to start
playback, press (SOURCE) repeatedly until
“FWD” or “REV” appears.
playback, press (SOURCE) repeatedly until
“FWD” or “REV” appears.
Tip
To change the tape‘s playback direction, press
(MODE) (o).
To change the tape‘s playback direction, press
(MODE) (o).
To
Press
Stop playback
(OFF)
Eject the cassette
(OPEN) then Z
Fast-winding the tape
During playback, press and hold either
side of (SEEK/AMS).
side of (SEEK/AMS).
To start playback during fast-forwarding or
rewinding, press (MODE) (o).
rewinding, press (MODE) (o).
Locating a specific track
— Automatic Music Sensor (AMS)
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
You can skip up to nine tracks at one time.
(SEEK/AMS) momentarily for each track
you want to skip.
You can skip up to nine tracks at one time.
Note
The AMS function may not work when:
— the blanks between tracks are shorter than
The AMS function may not work when:
— the blanks between tracks are shorter than
four seconds
— there is noise between tracks
— there are long sections of low volume or quiet
— there are long sections of low volume or quiet
sections.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 22.)
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 22.)
To locate
preceding
tracks
preceding
tracks
To locate
succeeding
tracks
succeeding
tracks
Rewind
Fast-forward
The side facing up is played.
The side facing down is played.
SOURCE
SOURCE