Sony XR-C6100R User Manual
16
EN
3
To return to the normal CD playback
mode, press (PTY/FILE) for two seconds.
mode, press (PTY/FILE) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for each
character.
To erase/correct a name, enter “_” (under-bar) for each
character.
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
playback, the item changes as follows:
z Elapsed playback time z Disc name
Clock Z
Erasing the disc memo
1
Press (SOURCE) to select the CD unit.
2
Play the CD and press (PTY/FILE) for two
seconds.
seconds.
3
Press (5) while pressing (SEL).
4
Press (+) or (–) to select the name that
you want to erase.
you want to erase.
5
Press (SEL) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (PTY/FILE) for two seconds.
The unit returns to the normal CD playback
mode.
The unit returns to the normal CD playback
mode.
Selecting the specific
tracks for playback
tracks for playback
(XR-C6100R only)
— Bank
(CD unit with custom file function)
— Bank
(CD unit with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
skip tracks and play only the tracks you want.
CD
Labeling a CD
(XR-C6100R only)
— Disc Memo
(CD unit with custom file function)
(CD unit with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name and select the specific tracks for
playback.
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name and select the specific tracks for
playback.
1
Play the CD and press (PTY/FILE) for two
seconds.
seconds.
2
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
in the reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
The flashing cursor moves to the next
space.
If you press (SEL) when the eighth
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
3 Repeat steps 1 and 2 to enter the
entire name.
CD
CD
CD