Sony XR-C2604J User Manual

Each time you press (DSPL), the item changes
as follows:

Tape playback y Frequency*

* While the ATA function is activated.

After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.

When fast-forwarding or rewinding with the
m

 or M button, the tuner will turn on

automatically.

During playback, press (MENU).

Press either side of (PRST/DISC)
repeatedly until “ATA” appears.

Press + side of (SEEK/AMS) to select
“ON.”

The selected play mode starts.

Press (ENTER).

To return to normal playback mode, select
“OFF” in step 3 above.

The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 6 stations
on each band (FM1, FM2, FM3, MW, SW1, and
SW2).

Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.

Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:

B

B

 CD*

B

 MD*

* If the corresponding optional equipment is

Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:

B

 FM1          B FM2          B FM3

SW2 b         SW1 b          MW b

Press (MENU), then press either side of
(PRST/DISC) repeatedly until “BTM”
appears.

Press (ENTER).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.

Notes
• The unit does not store stations with weak

• When a number is already indicated in the