Sony XR-C9100 User Manual

Other Functions

You can adjust the bass, treble, balance and
fader.
You can store the bass and treble levels
independently for each source.

Select the item you want to adjust by
pressing (SOUND)  repeatedly.

VOL (volume) n SUB (subwoofer volume)
n BAS (bass) n TRE (treble)
n BAL (left-right) n FAD (front-rear)

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)

Press (ATT) on the rotary commander or
wireless remote.
“ATT on” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

The follow items can be set:
•Clock (page 7).
•D.Info (Dual Information) – to display the

clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).

•Amber/Green – to change the illumination

color to amber or green.

•Dimmer – to change the brightness of the

display.
— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.

•Contrast – to adjust the contrast if the

indications in the display are not
recognizable because of the unit‘s installed
position.

•Voice guide function for vocalized comments.

— Select “Voice 1” to minimize the volume

of the guide.

— Select “Voice 2” to be louder the volume

than “Voice 1.”

— Select “Voice 3” to maximize the volume

of the guide.

— Select “Voice off” to deactivate Voice

guide.

•Beep – to turn on or off the beeps.
•RM (Rotary Commander) – to change the

operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary

commander as the factory-set position.

— Select “rev” when you mount the rotary

commander on the right side of the
steering column.

•BBE – to enjoy bass and treble even at low

volume. The bass and treble will be
reinforced.
— Select “BBE 1” to reinforce the bass and

treble.

— Select “BBE 2” to reinforce the bass and

treble more effectively than “BBE 1”.

— Select “BBE off” to deactivate BBE.

•LPF (Low Pass Filter)
•A.Scrl (Auto Scroll) (page 17).