Sony XR-C6200 User Manual
9
5
Press (SHIFT).
Notes
• The unit does not store stations with weak
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
some number buttons will retain their former
setting.
• When a number is already indicated in the
display, the unit stores stations in order from the
one currently displayed.
one currently displayed.
Memorizing only the
desired stations
desired stations
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3), up to 6 MW stations, and up to
12 SW stations (6 each for SW1 and 2) in the
order of your choice.
FM1, 2, and 3), up to 6 MW stations, and up to
12 SW stations (6 each for SW1 and 2) in the
order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band.
band.
3
Push the SEEK/AMS control up or down
to tune in the station that you want to
store on the number button.
to tune in the station that you want to
store on the number button.
4
Press and hold the desired number
button ((1) to (6)) until “MEM” appears.
The number button indication appears in
the display.
button ((1) to (6)) until “MEM” appears.
The number button indication appears in
the display.
Note
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by the
new station.
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by the
new station.
Receiving the memorized
stations
stations
1
Press (SOURCE) repeatedly to select the
tuner.
tuner.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
which the desired station is stored.
Tip
Press either side of (PRESET/DISC) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
Press either side of (PRESET/DISC) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
station
Push and release the SEEK/AMS control
up or down to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
up or down to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly
until “LOCAL” (local seek mode) is displayed. Then
press (4) (n) to select “LOCAL-ON.” Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly
until “LOCAL” (local seek mode) is displayed. Then
press (4) (n) to select “LOCAL-ON.” Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or
down and hold until the desired frequency
appears (manual tuning).
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or
down and hold until the desired frequency
appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
— Monaural Mode
1
During radio reception, press (SHIFT),
then press (3) (PLAY MODE) repeatedly
until “MONO” appears.
then press (3) (PLAY MODE) repeatedly
until “MONO” appears.
2
Press (4) (n) repeatedly until “MONO-
ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press (SHIFT).
To return to stereo mode, select “MONO-OFF”
in step 2 above.
in step 2 above.