Sony XR-CA665EE User Manual

Page of 52
25
Error displays/Messages
*1
When an error occurs during playback of a CD or 
MD, the disc number of the CD or MD does not 
appear in the display.
*2
The disc number of the disc causing the error 
appears in the display.
If these solutions do not help improve the 
situation, consult your nearest Sony dealer.
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5 
seconds, and an alarm sound will be heard.
BLANK
*
1
No tracks have been recorded on an MD.*
2
t Play an MD with recorded tracks on it.
ERROR
*
1
• A CD is dirty or inserted upside down.*
2
t Clean or insert the CD correctly.
• An MD does not playback because of some 
problem.*
2
t Insert another MD.
• A CD/MD cannot play because of some 
problem.
t Insert another CD/MD.
FAILURE
The connection of speakers/amplifiers is 
incorrect.
t See the installation guide manual of this 
model to check the connection.
HI TEMP
The ambient temperature is more than 50°C.
t Wait until the temperature goes down 
below 50°C.
NO DISC
No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.
NO MUSIC
A CD which is not a music file is inserted in 
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD 
unit.
NOT READY
The lid of the MD unit is open or the MDs are 
not inserted properly.
t Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error 
indication remains on in the display, 
consult your nearest Sony dealer.
RESET
The CD/MD unit cannot be operated because 
of some problem.
t Press the RESET button on the unit.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic 
tuning (page 11).
”  or  “
You have reached the beginning or the end of 
the disc and you cannot go any further.