Sony XR-L240 User Manual
14
Other Functions
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of the volume button.
Adjust within three seconds after selecting
the item.
either side of the volume button.
Adjust within three seconds after selecting
the item.
Attenuating the sound
Press (ATT).
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
To restore the previous volume level, press
(ATT) again.
“ATT-OFF” flashes momentarily.
(ATT) again.
“ATT-OFF” flashes momentarily.
Changing the sound and
display settings
display settings
The following items can be set:
•CT (Clock Time) (page 13).
•M.DSPL (Motion Display)
•CT (Clock Time) (page 13).
•M.DSPL (Motion Display)
– the demonstration mode which appears
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
•BEEP – to turn the beep sound on or off.
1
Press (SEL).
2
Press the preset number button to select
the desired item.
the desired item.
Number buttons
(2): CT
(4): M.DSPL
(6): BEEP
(4): M.DSPL
(6): BEEP
Note
The displayed item will differ depending on the
source.
The displayed item will differ depending on the
source.
3
Press the preset number button
repeatedly to select the desired setting
(Example: ON or OFF).
repeatedly to select the desired setting
(Example: ON or OFF).