Sony XR-CA600V User Manual
17
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (see “Changing the sound and
display settings” on page 18).
You can also change the operative direction of these
controls with the unit (see “Changing the sound and
display settings” on page 18).
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, and
fader.
The bass and treble levels can be stored
independently for each source.
fader.
The bass and treble levels can be stored
independently for each source.
1
Select the item you want to adjust by
pressing
pressing
(SOUND)
repeatedly.
Each time you press (SOUND), the item
changes as follows:
changes as follows:
BAS (bass)
t
TRE (treble)
t
BAL (left-
right)
t
FAD (front-rear)
2
Adjust the selected item by pressing
either side of
either side of
(SEEK)
.
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
(With the rotary commander or the card
remote commander)
remote commander)
Press
(ATT)
on the rotary commander
or card remote commander.
After “ATT-ON” momentarily appears, the
“ATT” appears in the display.
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
To increase
To decrease