Sony XR-CA600V User Manual

Page of 172
7
Getting Started
Resetting the unit
Before operating the unit for the first time or 
after replacing the car battery, you must reset the 
unit.
Remove the front panel and press the RESET 
button with a pointed object, such as a ballpoint 
pen.
Note
Pressing the RESET button will erase the clock setting 
and some stored contents.
Detaching the front panel
You can detach the front panel of this unit to 
protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF 
position without removing the front panel, the 
caution alarm will beep for a few seconds.
If you connect an optional amplifier and do not 
use the built-in amplifier, the beep sound will be 
deactivated.
1
Press 
(OFF)*
.
Tape playback or radio reception stops (the 
key illumination and display remain on).
*
If your car has no ACC position on the ignition 
switch, be sure to turn the unit off by pressing 
(OFF)
 for 2 seconds to avoid car battery drain.
2
Press 
(OPEN)
, then slide the front 
panel to the right, and gently pull out 
the left end of the front panel.
Notes
• If you detach the panel while the unit is still turned 
on, the power will turn off automatically to prevent 
the speakers from being damaged.
• Do not drop or put excessive pressure on the front 
panel and its display window.
• Do not subject the front panel to heat/high 
temperature or moisture. Avoid leaving it in parked 
cars or on dashboards/rear trays.
Tip
When carrying the front panel with you, use the 
supplied front panel case.
RESET button
continue to next page 
t
1
2