Sony XR-CA660X User Manual
20
Locating a disc by name
— List-up (For a CD unit with the CD TEXT/
CUSTOM FILE function, or an MD unit)
CUSTOM FILE function, or an MD unit)
You can use this function for discs that have been
assigned custom names*
assigned custom names*
1
or for CD TEXT
discs*
2
.
*1 Locating a disc by its custom name: when you
assign a name for a CD (page 19) or an MD.
*2 Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
TEXT function.
1
Press (LIST) momentarily.
The name assigned to the current disc appears
in the display.
The name assigned to the current disc appears
in the display.
2
Press (LIST) repeatedly until you find
the desired disc.
the desired disc.
3
Press either side of (SEEK) to play the
disc.
disc.
Notes
• Once a disc name has been displayed for 5
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
playback mode.
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine,“NO DISC”
appears in the display.
• If a disc has not been assigned a custom file,“NO
NAME” appears in the display.
• If the disc information has not been read by the unit,
“NOT READ” appears in the display. To load the
disc, first press the number button, then choose the
disc that has not been loaded.
disc, first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper cases. There
are also some letters which cannot be displayed
(during MD playback).
(during MD playback).
Additional Information
Maintenance
Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
exceeding the one supplied with the unit as this
could damage the unit.
Fuse (10 A)