Denon AVR-1312 User Manual

21

This mode is for enjoying stereo sound from all speakers.

–

0

1

Multi channel stereo playback begins.

When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or 
DTS Express, you cannot select multi channel stereo mode.

This mode is for enjoying surround effects using only the front 
speakers or headphones.

–

0

1

Virtual playback begins. 

When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or 
DTS Express, you cannot select virtual mode.

GViews on the displayH

q

w

q

 Shows a decoder to be used.

• A DOLBY DIGITAL decoder is displayed as “DOLBY D”.
• A DOLBY DIGITAL Plus decoder is displayed as “DOLBY DIGITAL 

+”.

w

 Shows a decoder that creates sound output from the surround 

back speakers.

For an input signal that can be reproduced in each surround mode, see 
“Surround modes and surround parameters” (

This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel 

audio and are played.

–

0

1

Stereo playback begins.

Sound recorded in source is played as is. 
• Surround back signals are not created. 
• In this mode, the following items cannot be adjusted. 

• Tone (

)

• RESTORER (

)

–

0

1

Direct playback begins.