Denon AVR-1312 User Manual

35

Make various other settings.

HDMI Audio Out
Select HDMI audio output 
device.

Amp : Play back through speakers connected to the receiver.
TV : Play back through TV connected to the receiver.

 If “TV” is selected, only an HDMI audio signal is output from the TV.

Auto Surround
Make setting for 
memorizing surround mode 
setting for each input signal 
type.

ON : Memorize settings. Automatically play with the last used surround 
mode.
OFF : Do not memorize settings. Surround mode does not change 
according to input signal.

The auto surround mode function lets you store in the memory the 
surround mode last used for playing the four types of input signals listed 
below.
q

  Analog and PCM 2-channel signals

w

  Dolby Digital and DTS 2-channel signals

e

  Dolby Digital and DTS multi-channel signals

r

  LPCM Multi-channel signals

Display
Adjust the display 
brightness of this unit.

Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
OFF : Turns the display off.

 Buttons on the main unit can be used for 

operations.
Each time 

 is pressed, the setting is 

changed as shown below.

Bright

Dim

Dark

OFF

Setup Lock
Protect settings from 
inadvertent change.

ON : Turn protection on.
OFF : Turn protection off.

To turn OFF the “Setup Lock”, follow the 
procedure below.

q

 Press and hold 

 for at least 3 seconds.

“Setup Lock:

0ON 1” appears on the display.

w

 Press 

p

 to select “OFF”, and then press 

.

When “Setup Lock” is set to “ON”, the settings listed below can no 
longer be changed. Also, “Setup Lock!” is displayed if you attempt to 
operate related settings.
• Menu operations

• Channel Level

• RESTORER

• Audio Adjust

BD