Denon AVR-3310CI User Manual

0

:Displaying the menu
Cancel the menu

:Moves the cursor
(Up/Down/Left/Right)

:Confirm the setting

:Return to previous menu

Set the volume of the test
tone to be the same when it
is output from each speaker.

Test Tone Start : Output test tone.

Front L / Front Height L / Center / Front Height R / Front R / Front 
Wide R / Surround R / S. Back Rz / S. Back Lz / Surround L / Front 
Wide L / Subwoofer : Select the speaker.

z : When  the  “Speaker  Configuration”  –  “Surround  Back”  setting

(vpage 9) is set to “1spkr”, “S. Back” is displayed.

 –12.0dB ~ +12.0dB (0.0dB) : Adjust the volume.

Speakers  set  to  “None”  in  the  “Speaker  Configuration”  (vpage  8)
settings are not displayed.
When

o

is pressed while the subwoofer volume is set to “–12 dB”, the

“Subwoofer” setting switches to “OFF”.
When a headphones jack is inserted in the PHONES terminal of the AVR-
3310CI, the “Channel Level” is not displayed.
You  can  also  press

 to  set  (vpage  79  of  GThe 

original  versionH  Operating  Instructions  “Adjust  the  Volume  of  the
Different Speakers“).

•

•

•

•

•

•

Default : Reset all channel level settings to factory default.

Yes :

Reset to the defaults.

No : Do not reset to the defaults.

•

•

Outputs at below set
frequency, each speaker’s
bass signal output from
the subwoofer. Set this
according to the low
frequency reproduction
capabilities of the speakers
you are using.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 

250Hz : Set the crossover frequency.

Advanced : Specify crossover frequency for each speaker.

Front  /  Center  /  Surround  /  Surround  Back  /  Front  Height  /  Front 
Wide : Select the speaker.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz /150Hz / 200Hz /

250Hz : Set the crossover frequency.

Can be set when the “Speaker Configuration” – “Subwoofer” (vpage
8) setting is “Yes”, or when you have a speaker that is set to “Small”.

Always  set  the  crossover  frequency  to  “80  Hz”.  When  using  small

speakers, however, we recommend setting the crossover frequency to

a higher frequency.

For speakers set to “Small”, sound below the crossover frequency is cut

from the sound output. The cut bass sound is output from the subwoofer

or front speakers.

The  speakers  that  can  be  set  when  “Advanced”  is  selected  differ
according to the “Subwoofer Mode” setting (vpage 9).

When  “LFE”  is  selected,  speakers  set  to  “Small”  at  “Speaker

Configuration”  can  be  set.  If  the  speakers  are  set  to  “Large”,  “Full

Band” is displayed and the setting cannot be made.

If  set  to  “LFE+Main”,  this  setting  can  be  made  regardless  of  the

speaker size.

•

•

•

•

•

•

•

•

Set the front speakers to
use for every surround
mode.

Setting : Choose the method for setting the front speakers.

Normal : The front speakers are set using the

.

 Custom : The front speakers used for the different playing modes are
set in advance.

2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.

A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.

MULTI  CH  :  The  front  speakers  used  in  modes  other  than  the  direct,
stereo and pure direct play modes (2 channel) are set in advance.

A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.

• When set to “Custom”,

does not operate.

• The front speaker setting stored for the “Quick Select” function is given

priority.

•
•

•
•
•

•
•
•