Denon AVR-3310CI User Manual

Use the graphic equalizer
to adjust the tone of each
speaker.

Adjust CH : Correct the tone of each speaker.
q

  Select the speaker tone adjustment method.

All : Adjust the tone of all speakers together.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.

w

  Select the speaker.

e

  Select the adjustment frequency band.

63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz

Select  the  speakers  you  want  to  adjust  when  “L/R”  or  “Each”  is
selected.

r

  Adjust the level.

–20.0dB ~ +6.0dB (0.0dB)

Can be set when the “MultEQ” setting (vpage 13) is “Manual”.

b

Base Curve Copy : Copy “Audyssey Flat” curve from MultEQ.
Yes : Copy.
No : Do not copy.

“Base Curve Copy” is displayed after Audyssey Auto Setup procedure

has been performed.

Default : Reset the settings to the default values.

Yes : Reset.
No : Do not Reset.

•
•

This function restores
compressed audio signals
to how they were before
compression and corrects the
sense of volume of the bass
and treble to obtain richer
playback sound.

OFF : Do not use RESTORER.
Mode 1 (RESTORER 64) : Optimized mode for compressed sources with
very weak highs.
Mode  2  (RESTORER  96)  :  Apply  suitable  bass  and  treble  boost  for  all
compressed sources.
Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with
normal highs.

This can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
This cannot be set when the input mode is set to “EXT. IN” or when the
surround mode is set to “DIRECT”.
The default setting for “iPod” and “NET/USB” are “Mode 3”. All others
are set to “OFF”.
When set to something other than “OFF”, “

” is displayed.

This can also be set by pressing

during playback.

OFF

Mode 1

(RESTORER 64)

Mode 2

(RESTORER 96)

Mode 3

(RESTORER HQ)

•

•

•

•
•

(Continued)

• Such compressed audio formats as MP3, WMA (Windows Media Audio)

and  MPEG-4  AAC  reduce  the  amount  of  data  by  eliminating  signal
components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring
the  sound  to  conditions  near  those  of  the  original  sound  before
compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.

• This is displayed on the GUI menu and can be set when the input source

is set to “HD Radio” or “NET/USB”, or when analog signals (including
FM/AM signals) or PCM signals (fs = 44.1/48 kHz) are input.

While viewing video,
manually adjust the time to
delay audio output.

0ms ~ 200ms

This  can  be  set  within  the  range  of  0  to  100  ms  when  “Auto  Lip
Sync” is set to “ON” and when a TV compatible with Auto Lipsync is
connected.
Store “Audio Delay” for each input source.
You can also press

to set.

•

•
•

:Displaying the menu
Cancel the menu

:Moves the cursor
(Up/Down/Left/Right)

:Confirm the setting

:Return to previous menu