Denon AVR-3310CI User Manual

G

Example qH

G

Example wH

(  : Measuring positions)

FL : Front speaker (L)

C : Center speaker

FR : Front speaker (R)

SW : Subwoofer

FHL : Front height speaker (L)

SL : Surround speaker (L)

FHR : Front height speaker (R)

SR : Surround speaker (R)

FWL : Front wide speaker (L)

SBL : Surround back speaker (L)

FWR : Front wide speaker (R)

SBR : Surround back speaker (R)

n

The  acoustic  characteristics  of  the  connected  speakers  and
listening  room  are  measured  and  the  optimum  settings  are  made
automatically.

n

a

Connect the Included Setup Microphone

d

s

Audyssey Auto Setup Preparations

Change the Amplifier Assignment  
(Amp Assign) (vpage 7)

When upgrading, contents of “Amp Assign” are modified.

n

n

(Audyssey™ Auto Setup)

Audyssey MultEQ® automatically measures the acoustical problems
in the listening environment to create the best audio experience for
your home theater.
• When Audyssey™ Auto Setup procedure is performed, the MultEQ®,

Dynamic EQ® and Dynamic Volume™ functions (vpage 13 ~15)
are enabled.

• Use the included setup microphone (DM-A409) to perform Audyssey

Auto Setup procedure.

• Measurements are performed by placing the calibrated microphone

successively at multiple positions throughout the listening area as
shown in GExample qH. For best results, it is strongly recommended
to measure 6 positions so that the measurements have the proper
spatial weighting.

 Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment
results in more effective correction.

G

Example qH

G

Example wH

(  : Measuring positions)

n

The main listening position refers to the most central position where
one would normally sit within the listening environment.
MultEQ®  uses  the  measurements  from  this  position  to  calculate
speaker distance, level, polarity, and the optimum crossover value
for the subwoofer.